If your phone suddenly turns into a drowned person after an unfortunate fall into the water, the main thing is to remain calm and act quickly. Immediate response can save the device from irreversible damage. In this article, we will discuss in detail what to do in such a situation step by stepand whether it is possible to recover a phone after drowning in water. We will also touch on preventive measures that will help avoid such situations in the future.
Urgent actions after a phone falls into water
The question often arises, if a phone falls into water, what should you do at home? and what are the ways to save the device. First of all, immediately remove your phone from the water and, if possible, turn it off by holding the power button. This is the first of a number of steps necessary to minimize moisture damage. It is vital that you do not try to turn on the device after such an incident, as this may cause further damage.
- Immediately remove the phone from the water.
- Turn off the device and do not try to turn it on.< /li>
- Gently wipe the water off the phone with a tissue, being careful not to get water into the openings and connectors.
- If possible, remove the battery, SIM card and memory card.
- Insert everything components onto an absorbent cloth in a dry, warm place.
For cases where you need to know what to do if your phone with a non-removable battery gets wet, be sure to try to concentrate on drying the device safely – without risk to the battery.
Mistakes that can aggravate the situation
There are many methods that at first glance may seem useful, but in fact only harm. One example of such a method is the use of a hair dryer, which with hot air may not only not perform its function, but also lead to damage to the internal elements of the phone. Shaking or using force can also make the situation worse by spreading water inside the device. Pressing buttons and attempting to turn on the device with wet hands may result in a short circuit if water gets inside the circuit.
| Error | Why is this bad? |
|---|---|
| Using a hair dryer | Hot air can damage components |
| Shaking the device | Promotes the spread of water through the phone |
| Pressing buttons | Increases the risk of short circuit |
| Attempts to charge immediately | Can cause short circuits and burn electronics |
Effective methods for drying your phone
When it comes to restoring your device after contact with water , it is important to know how to dry your phone after falling into water at home with a non-removable battery. The optimal solution here is to use silica gel – an absorbent that has a high ability to absorb moisture. These small packets can be found in packages containing shoes, bags and electronics, so they’re worth keeping for a rainy day.
Checking functionality after drying
After you’ve had enough time to dry phone at home, it is important to carefully inspect the device before turning it on. You should start with an external inspection: check if there is any moisture left in the ports and connectors, make sure that there is no visible damage on the case and screen. If after inspection you do not notice any traces of moisture, you can try to turn on the phone, but this must be done smoothly so as not to provoke technical problems. Turn it on by holding the power button and watch the reaction. If your phone won’t turn on or isn’t working properly, it’s time to seek professional help.
Prevention and tips to prevent future accidents
What happened once can happen again if you don’t take action precautions. Consider using waterproof cases and films that can protect your phone from water. In addition, you should follow certain rules for using your phone near water. For example, if you like to spend time near the water, try to keep the device away from the edge of the pool or bathtub. Another important aspect is to back up your data regularly. This will help save your information in case the phone is not recovered.
Summary
In this article, we looked at several steps that you can take if your phone is a victim of water. By following these simple guidelines, you can increase your chances of restoring your device:
- Quickly remove your phone from the water, turn it off and remove the battery (if possible).
- Dry your phone thoroughly dry and clean cloth, avoiding unnecessary pressure on the buttons.
- Immerse the phone in raw rice for several hours to absorb moisture.
- Do not turn on the phone immediately after removing it from the rice – let it completely dry.
- Try to turn on the phone and, if it does not work, contact a professional or service center.
Remember that the reaction speed plays a key role in restoring the phone after water . The sooner you take action, the more likely you are to maintain the functionality of your device.
Be careful and keep your phone safe from water!
Frequently asked questions questions
- What to do immediately after the phone has fallen into the water?
Immediately remove the phone from the water, turn it off, and, if possible, remove the battery. This will help prevent damage to the device. - Why is it important to use rice to dry your phone?
Rice helps absorb moisture from your device. Place your phone in raw rice for a few hours to speed up the drying process. - Is it possible to turn on the phone immediately after drying it in rice?
No, let the phone dry completely before turning it on. Turning on a wet device may cause damage. - What to do if the phone does not work even after drying?
If the device still does not function, it is recommended to contact a professional or service center for further assistance.
